WES DS 1500 self contained dosing system

Fully enclosed Chemical dosing unit with 1500 Litre storage capacity & integral bund.

          

Principle

A fully enclosed chemical dosing system comprising a weatherproof Polyethylene rotationally moulded enclosure and integral bund into which is fitted a 1500 Litre Polyethylene storage tank. Single duty or duty/standby pumps can be fitted with dose rates up to 150 Litres/hr.  

 

 

 

Uses

Designed as a small to medium capacity packaged Chemical dosing system for indoor or outdoor applications. Dosing pump and control options available for dose rates from 0.004—150 L/hr.

Extremely versatile from simple single pump to a more complex system as seen to the right.

 

Safety & Ease of Use

With an integral bund and sperate doors to the fill & dosing/control compartments, the unit provides a safe & robust fully enclosed lockable unit. By using Digital dosing pumps which have a user interface that lets you enter the dosing rate you want directly on the screen,the systems are very simple to use. Furthermore, with a very wide turndown ratio (100:1 for smaller pumps 800:1 for large pumps) and no need for complicated stroke rate calculations, the system is truly “plug & play”.

Features

• Polyethylene enclosure IP54 rated with integral 1650 Litre capacity bund, (resistant to most Chemicals), separate lockable front access doors for fill & dosing compartments, 1500 Litre rotationally moulded storage tank. The unit is designed to be moved by forklift with integral lifting slots.
• Fill point—Separate fill door opening to proprietary/compliant fill connections & valves for filling by Chemical delivery suppliers.
• Grundfos/Alldos Digital Dosing Pump(s) allowing direct operator entry of dose rate. Also, allowing manual or auto operation modes with direct input of pulse or 4-20mA flow proportional control signals. Single pump duty or dual pump duty & standby setups are possible.
• Connections—3 Vertical sleeve tubes rising through the bund to the dosing compartment allow power & signal cabling to enter & dosing lines to exit without being visible from outside the unit.
• Control—various options available from simple manual control to full flow proportional automatic dosing with automatic duty/standby pump changeover. Telemetry options also available.
• Dose rates—Models available allowing dose rates as low as 0.025 l/hr or up to 150 l/hr.
• Drip tray/bund—The integral bund will contain any leakage and the level switch will inhibit the pump(s).
• Health & Safety—With integral chemical containment, automatic leak detection cut-off & splash screens, etc. The DS1500 providesa safe dosing system for both operator & environment.

Technical Specifications

Accessories & Options

A full range of accessories including, suction & delivery hoses, injectors, controllers, etc.

Options include materials of construction for pump head, valves & pipework to suit chemical to be conveyed.
Calibration vessel.

Control options including fully auto from run signals and/or flow proportional control signals.