The DosingCube™ is a self contained dosing system designed specifically for emergency dosing of water & waste water treatment chemicals from an IBC or existing chemical storage tank.
Site the DosingCube™ in an appropriate/safe location (brackets are supplied for use with an IBC). Place suction pipe into chemical and run discharge pipe to the point of application. Use a dual contained pipe arrangement where possible. The DosingCube™ itself acts as a bund and includes a relief valve and float switch, however, a tank/IBC bund is also recommended.
Please note that the materials of construction for this product are suitable for most chemicals commonly used in water and waste water treatment. The operator should confirm that chemical compatibility is suitable. Chemicals to be used should be defined at point of order. Once correct installation is complete the DosingCube™ is ready for use and can be operated in the chosen mode, i.e. manual, automatic or flow proportional (additional cables required for flow proportional). For long suction runs the pump may need to be manually primed before the system is ready for automatic use (see pump manual). The lid of the DosingCube™ is lockable for safety of operation and to prevent tampering.
The standard pump head is constructed of Polypropylene suitable for the following chemicals:
Aluminium Chloride, Ammonia 10%, Calcium Hydroxide, Calcium Hypochlorite, Ferric Chloride, Ferric Sulphate, Hydrochloric Acid 37%, Hydrogen Peroxide 30%, Sulphuric Acid 70%.
The WES DosingCube™ can be configured to dose almost any chemical additive.
Dimensions: 450 x 450 x 480 mm.