Product

Hyprolyser 180

  • Hyprolyser 180g/h Cl2
  • 185-265V, 1ph, 50/60Hz
  • 0.9KW/h power useage
  • 25.3 l/h water usage
  • 0.64kg/h salt usage

Hyprolyser: The safe, reliable, extremely economical and efficient system for on-site production of sodium hypochlorite solution.

Hyprolyser™ produces a sodium hypochlorite solution (NaClO) from the electrolysis of common salt (sodium chloride NaCl) in a salt and water (H2O) solution. The reactor produces a safe and usable solution which is less than 8g/l active chlorine and a small amount of hydrogen gas with no other by-products.

Generated sodium hypochlorite is stored in an internal product tank ready for use (additional storage tanks are available if required). Hydrogen gas is diluted with air at source and monitored with a fail-safe system, so that all areas within the electrolyser, product tank and ventilation pipework remain well below the LEL .

The reaction is a 2 part process. The initial reaction produces sodium hydroxide (NaOH), chlorine gas (Cl2) and hydrogen gas (H2). The sodium hydroxide(NaOH) and chlorine gas (Cl2chloride (common salt NaCl) and water (H2O). The hydrogen gas (H2) production is very slight and is vented away. Then the process continues.

The Hyprolyser™ range of systems are suitable for a wide range of commercial and indus trial water applications.

Drinking water, Swimming pool and spas, Brewing, Food processing and agricultural washing, Cooling towers, Water treatment, Bleaching

Site Requirements

Water:

Mains/clean water quality at up to 140 litres per kg chlorine production and at a pressure in the range of 1.5 – 5.0 bar. For pressures below this a booster pump can be pr ovided.

Salt:

Food grade quality salt with low calcium content <100mg/kg. Where product to be used for dosing into water intended for human consumption a low bromide content salt should be used. 3.5kg Salt for each kg of chlorine pr oduction

Power: 1

85 – 265V 50/60Hz 4.5kW/h per kg/h chlorine production

Drain:

A local drain is required for softener regeneration

Vent:

Safe discharge point as close to electrochlorination unit as possible. High and Low level natural room ventilation required.

Additional information

Weight94 kg
Brand

WES DP

Available chlorine g/h

180

Dynamic Visibility - Custom Condition: syntax error, unexpected '}', expecting ';'

Give WES A Call

General Enquiries

We use cookies to ensure that we give you the best experience on our website. By clicking Accept, you consent to store on your device all technologies described in our Privacy Policy.

Les Bunce

Hire Business Manager

Les Bunce is Hire Business Manager. He leads the WES Hire Business responsible for managing the supply of our Temporary Chemical Dosing hire fleet on both a planned and emergency basis. Les has over 25 years’ experience in the hire industry and fully understands our customers’ hire requirements.

Patrick Fisher

Projects Director

Patrick Fisher is Projects Director. He leads the business stream responsible for project management, design, engineering, manufacture and delivery of “Capital project” chemical dosing systems. A degree qualified engineer with over 10 years’ experience working in fluid delivery solutions to the water, general industrial, petrochemical, and food & beverage industries.

Bob Cook

Senior Proposals Manager

Bob Cook is Senior Proposals Manager. After completing a traditional engineering apprenticeship at the Royal Aircraft Establishment, Bob was one of the original partners who started the business in 1986. Bob now applies his considerable experience to developing proposals & solutions to meet customer requirements, as well as providing technical support & passing on knowledge & expertise to colleagues across the wider WES business.

Ian Price

Dosing Products Business Manager

Ian Price is WES Dosing Products Business Manager, leading the business stream responsible for delivering a wide range of standardised chemical dosing packages, ad-hoc dosing needs and ‘off the shelf’ dosing products & solutions. A mechanical engineer with over 20 years’ experience in fluid handling solutions into the water, petrochemical, pharmaceutical and food & beverage markets.

Jamie Cole

Operations Director

Jamie Cole is Operations Director. Jamie joined the business in 2018 bringing career long experience in a variety of operational roles – including service delivery to the property and utilities sectors. Jamie is responsible for the management of all operational activities of the business including the repair, maintenance & refurbishment business stream, and our site installation and workshop manufacturing teams. Jamie also forms part of the senior management team of WES.

Graham Ward

Business Development Director

Graham Ward is Sales and Marketing Director. His extensive experience includes a number of senior roles working for various SMEs and large organisations in the water, power generation, petrochemical, marine and food & beverage industries. As a qualified marine engineer, Graham has established his career in Sales and Business Development and is responsible for the business development, marketing and sales of systems, products and services across WES.

Carl Millington

Non-Exec Director

Carl joined WES as Non-Exec chairman following an appointment via the Business Growth Service to assist the business with growth strategy. A highly experienced Business Mentor, Coach, Managing Director & Non-Exec Chairman, having led product, manufacturing, contracting and service provider businesses for nearly 30 years. A strong track record of market, sales and profit growth within a diverse range of sectors.

Core competencies include business growth strategies, board & business leadership, strategic planning, sales & marketing management, P&L & balance sheet management, acquisitions, divestments, outsourcing, TUPE transfer, mentoring & coaching.

Kevin Wheeler

Managing Director

Kevin Wheeler is Managing Director. Kevin trained as an Engineer at the Royal Aircraft Establishment and joined the business in 1989. Kevin now leads the Board of Directors setting strategy and defining priorities to meet the business objectives & growth aspirations whilst adding experience to technical issues where required.